Whp-wireless DL360 Bedienungsanleitung PDF herunterladen (Seite 172)

172 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide

Logical Drive X Status = Recovering (rebuilding data on a replaced drive)

Description: A physical drive in this logical drive has failed and has now been

replaced. The replaced drive is rebuilding from the mirror drive or the parity

data.

Action: No action is required. Normal operations can occur; however,

performance will be less than optimal until after the rebuild process completes.

Logical Drive X Status = Wrong Drive Replaced

Description: A physical drive in this logical drive has failed. The incorrect drive

was replaced.

Action: Replace the drive that was incorrectly replaced. Then, replace the

original drive that failed with a new drive.

CAUTION: Do not run the server setup utility and try to

reconfigure, or data will be lost.

Loose Cable Detected - Logical Drives May Be Marked FAILED Until Corrected

Description: ADU found a loose cable. The Smart Array Controller is unable to

communicate with one or more physical drives. One or more logical drives may

be marked FAILED, and are unusable until the problem is corrected.

Action: Power down the system. Check the cables for a tight connection to the

logical drives. Restart the system. If the error persists, the cables may be

defective.

Mirror Data Miscompare

Description: Data was found at reset initialization in the posted-write memory;

however, the mirror data compare test failed resulting in that data being marked

as invalid. Data loss is possible.

Action: Replace the array accelerator board.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 245 246

Keine Kommentare

Whp-wireless DL360 Bedienungsanleitung Seite 172